• Network Infrastructure and Security (NIS) Subcommittee
    Jun 09 - 11, 2020
    Virtual Meeting

    The goal of this activity is to develop standards for IP connectivity and security to the aircraft that enables fleet-wide solutions based on open standards. The expect benefit is lower development cost, increased flexibility, higher reliability, reduced complexity, longer lifespan, and ease of configurability and maintenance.

  • Aeronautical Operational Control (AOC) Subcommittee
    Jun 16 - 19, 2020
    Virtual Meeting

    The goal of this activity is to specify the exchange and format of air-ground AOC messages. The AOC Standard simplifies the integration of AOC applications from different suppliers, for different airplane types, that are not controlled by the airlines. 

  • Cabin Systems Subcommittee (CSS)
    Jun 17, 2020
    Virtual Meeting

    Meeting Dates: June 17, July 15, and August 12, 2020

    Subject to be covered: ARINC Project Papers 808A/809A: 3GCN Plus Architecture

    The scope of the Cabin Systems Subcommittee is to develop standard interfaces that will provide airlines with freedom of choice in the installation and expansion of cabin equipment. Cabin telecommunications, cabin networks, interface protocols, and connector standardization are also a part of this activity. 

  • Global Aircraft Tracking (GAT) / Timely Recovery of Flight Data (TRFD) Working Group
    Jun 22 - 24, 2020
    Virtual Meeting

    The goal of the TRFD Working Group is to prepare standards applicable to the ICAO Global Aeronautical Distress and Safety System (GADSS). These are intended to preserve flight data recorder information by transmitting it prior to an accident or safeguarding it on a deployable recorder.

  • Internet Protocol Suite (IPS) for Aeronautical Safety Services
    Jun 23 - 29, 2020
    Virtual Meeting

    Meeting Days: June 23, 24, and 29, 2020

    The IPS Subcommittee is leading the development of industry standards for the Internet Protocol Suite for aeronautical safety services. This includes airborne, ground-based, and space-based communication systems. The purpose of this meeting is to coordinate ATN/IPS development activities among international Standards Development Organizations (SDOs) namely ICAO, EUROCAE, and RTCA. 

  • Ku/Ka Band Satellite (KSAT) Subcommittee
    Jun 23 - 26, 2020
    Virtual Meeting

    The goal of this activity is to develop Ku-band and Ka-band satellite communication (satcom) systems that meet operators’ high-performance requirements. The equipment specified are typically used to provide passenger data, video, and voice communication services.

  • Systems Architecture and Interfaces (SAI) Subcommittee
    Jun 25, 2020
    Virtual Meeting

    The Systems Architecture and Interfaces (SAI) Subcommittee will discuss avionics system-level guidelines intended for new airplanes and major retrofit programs. It will discuss emerging Communication, Navigation, and Surveillance (CNS) equipment.

  • AEEC
    Jun 30 - 02, 2020
    Annapolis, Maryland

    The EFB Users Forum is a joint activity with IATA that enables airlines and other aircraft operators to state their preferences in the evolution of EFB hardware, software applications, and connectivity to the ground. This ensure operational benefit to the flight deck crew and the economic benefit to the airlines. Flight Operations, Information Technology, Engineering, and Maintenance disciplines are represented among the participants of the EFB Users Forum.

  • Data Link (DLK) Systems Subcommittee
    Jul 07 - 10, 2020
    Virtual Meeting

    The goal of this activity is to develop Standards that promote the efficient transfer of ACARS and Air Traffic Service data between the aircraft and the ground. These Standards benefit the FAA NextGen Data Communications, the Single European Sky (SES) Data Link Services (DLS) Programme and CPDLC operation in general. 

  • May 10 - 13, 2021
    Tampa, Florida
    One Great Venue, Two Conferences.

    The Airlines Electronic Engineering Committee (AEEC) General Session and Aviation Maintenance Conference (AMC) join together in one location to bring together industry experts from around the world. The AEEC General Session and AMC provide opportunities to explore common issues and advancements in the industry through discussion and technical symposiums, and direct focus on the advancement of technical standards and committee and working group activities under the auspices of the AEEC and AMC. 

    The AEEC General Session is an important event on the AEEC calendar. The AEEC General Session marks the culmination of the years' standards development work. New ARINC Standards are discussed and approved at this meeting. Additionally, the AEEC initiates the work program and schedule for the coming year. The AEEC General Session is an ideal opportunity for aviation industry professionals to obtain an overview of the important technical developments in air transport avionics and other aircraft electronics.

    The objectives of AMC are to promote reliability and to reduce operating and life cycle costs of air transport components by improving maintenance and support techniques through the exchange of technical information. 

Pages