ARINC CssRptFeb19

Cabin Systems Subcommittee (CSS) Meeting Report, February 2019

Last Published: 
Friday, April 5, 2019

Cabin Systems Subcommittee (CSS) Meeting Report. Meeting held February 5-7, 2019, in St. Augustine, Florida.

The Cabin Systems Subcommittee (CSS) met in St. Augustine, Florida to prepare ARINC Standards for cabin applications. The meeting was hosted by Carlisle Interconnect Technologies.

The meeting focused on the following activities:

  • Development of Supplement 8 to ARINC Specification 628: Cabin Equipment Interfaces, Part 1, Cabin Management and Entertainment System – Peripherals. The purpose of this project is to evaluate and standardize certifiable technical implementation solutions for:
  • Global CWAP Operational Management (GCOM) for use on regional or international flights (APIM 15-006).
  • Interface definitions for High-Definition (HD) Landscape Camera and UHD (4K) video streams. (APIM 15-006 and APIM 16-005).
  • Standardization of aircraft interior surveillance systems (APIM 17-011).
  • Standardization of a Cabin Wireless Access Point (CWAP) capable of supporting greater than 1 Gbps Ethernet Interfaces (APIM 17-009).
  • Development of ARINC Project Paper 648: Requirements and Recommended Practices for Cabin Seat Production Testing. The document provides guidance for production testing of seats and seat groups at the seat suppliers’ facilities so that fully tested seats and seat groups will be received at the airframe manufacturer assembly lines, MRO, or at the operator facility for installation. ARINC Project Paper 648 is being developed under APIM 15-001. A mature draft is expected by October 2019.
  • Development of Supplement 4 to ARINC Specification 664: Aircraft Data Network, Part 2, Ethernet Physical and Data Link Layer Specification to include the physical and data layer for Ethernet based on IEEE 802.bw (100BASE-T1) and IEEE 802.3 bp (1000BASE-T1) interface for commercial aircraft. A work plan for Supplement 4 to ARINC 664, Part 2 submitted by Boeing was reviewed at the meeting.
  • Development of Supplement 2 to ARINC Specification 800: Cabin Connectors and Cables, Part 2, Specification of Connectors, Contacts, and Backshells to include inserts and connectors suitable for use with IEEE 802.bw (100BASE-T1) and IEEE 802.3 bp (1000BASE-T1) Ethernet systems used by the next generation network bus (ARINC Project Paper 854). This work is driven by APIM 16-011A and is expected to be mature in April 2020.
  • Development of Supplement 3 to ARINC Specification 800: Cabin Connectors and Cables, Part 3, Specification of Cables to include CAT 5A (two wire) and CAT 6 (four wire) cables suitable for use with IEEE 802.bw (100BASE-T1) and IEEE 802.3 bp (1000BASE-T1) Ethernet systems used by the next generation network bus (ARINC Project Paper 854). This work is driven by APIM 16-011A and is expected to be mature in April 2020.
  • Development of Supplement 3 to ARINC Specification 808: 3GCN – Cabin Distribution System to update the 3GCN architecture to incorporate a 10 Gbps fiber backbone routed between the head-end IFE equipment and the Area Distribution Boxes that form the cabin network distribution system. This work is driven by APIM 17-011 and is expected to be mature in October 2019.
  • Development of Supplement 4 to ARINC Specification 809: 3GCN – Cabin Distribution System to update the 3GCN architecture to incorporate a 10 Gbps fiber backbone routed between the head-end IFE equipment and the Area Distribution Boxes that form the cabin network distribution system. This work is driven by APIM 17-011 and is expected to be mature in October 2019.
  • Development of ARINC Project Paper 820 to define cabin network architectures for wireless distribution. The goal is to enable wireless delivery of media to passenger and crew Portable Electronic Devices (PEDs) and support media loading for seat-centric In-Flight Entertainment System (IFES). This work is being performed under APIM 14-001. A mature draft is expected in April 2019.
  • Development of ARINC Project Paper 854 to define the next generation cabin bus using Ethernet. The CSS will (1) develop Supplement 4 to ARINC Specification 664, Part 2 to define the physical and network layers for 100BASE-T1 and 1000BASE-T1, and  (2) develop a new ARINC Project Paper 854 to define bus application to cabin systems, initially for in-seat network and Cabin Lighting Systems. This work is being performed under APIM 16-011A.

The next CSS meeting will be held May 22-24, 2019, in Fulda, Germany, hosted by COTSWORKS. Meeting details can be found at the AEEC CSS webpage, here: https://www.aviation-ia.com/activities/cabin-systems-subcommittee-css

Non-Member Price:
$115.00

Need Help with an Order?

Customer Service Illustration

Customer Service

telephone: +1 443.534.7439
[email protected] 

Notice an Error?

Report it using our errata form.